Polyurea is a type of compound reacted by isocyanate component (short to part A) and amide blend (short to part B). Following the high-solids coatings, waterborne coatings, radiation curable coatings, powder coatings and other pollution free coating technologies, Spray Polyurea Elastomer (referred SPUA) technology is a solvent-free, pollution-free green application coating advanced technology developed to meet environmental requirements in nearly two decades abroad. It’s a revolutionary leap of traditional construction technology which combines new technology new material and new procedures together. Its a breakthrough for changing the traditional anticorrosion protective concept and set up a higher standard for the material protection industry.
SWD two component solvent free environment friendly pure polyurea polyurea anticorrosion coating is developed by SWD Urethane Co., USA in 1992. Based on the high reactivity and fast curing property, it can be sprayed forming at any bent, inclined and vertical surface without sagging. With super adhesive strength and impact resistance characteristics, the polyurea anticorrosion coating is flexible, impact resistant and seamless that able to completely insulate air and water and oxygen penetration. It integrated anticorrosion, waterproof, wear resistance, aging resistant performances, no pulverization and crack peel up or fall down after long- term outdoor work with alternating ambient conditions of cold, heat, rain and snow.
Adhesive strength (concrete base) 2.9 Mpa( or substrate broken)
Adhesive strength (steel base) 11.3 Mpa
Tear strength 80.6kN/m
Tensile strength 17.8Mpa
Penetrate resistance 2.3Mpa
Temperature variation -40------+120℃
Wear resistance (700g/500r) 5mg
Acid resistance (10%H2SO4 or 10%HCI, 30d) no rust no bubbles no peel
Alkali resistance 10%NaOH, 30d no rust no bubbles no peel
Salt resistance 30g/L, 30d no rust no bubbles no peel
Salt spray resistance 2000h no rust no bubbles no peel
Oil resistance 0# diesel crude oil 30d no rust no bubbles no peel
Data of performance
Color Multiple colors as customers’ need
Volume solid content 99% ±1%
Recommended dry film thickness 1000-3000μm
Theoretical coverage 2.04kg/sqm (calculated by the above solids percentage and dry film thickness of 2000 microns)
Practical coverage Allow appropriate loss rate
Dry time 5-20s
Overcoating interval min: 1h, max: 24h
Overcoating method Special polyurea equipment spray (imported or local support)
Flash point 200℃
Name of products
Dry film thickness(μm)
SWD polyurea special primer
SWD900 spray polyurea elastomer
Application scopes Anticorrosion waterproof protection in the fields of construction, chemical, traffic, metallurgy, power generation, aerospace, marine, shipping industries and etc.
Shelf life 6 months (Indoor with dry and cool conditions)
Production places Minhang Shanghai City, and Nantong coastal industrial park production base in Jiangsu (15% of the raw materials imported from SWD US, 30% from multinational company in Shanghai, 55% from local support)
Security To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment protection. Do not even contact the surface of wet coating.
Integrity declaration Our company guarantees the reality of the listed data. Due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the polyurea anticorrosion coating quality self and reserve the right of modifying the listed data without prior notice.
1.We are factory.
SWD New Material (Shanghai) Co., Ltd is a professional manufacturer of polyurea polyurethane coating and pu foam in China, with headquarter in US for over 40 years. We have our own production workshops focusing on all aspects of anticorrosive waterproof, insulation fields. US technology and made in China, high quality and nice prices.
2.OEM is accepted ?
We have our own R&D team and specialists, so we can customize the product that customer’s require.
3.How to guarantee the high quality?
We have the ISO9001 quality management system certificate, we are PDA member and have standard test reports. We strictly implement the rules according to the quality standard in every aspectsfrom the purchase of raw material to the production process and outgoing of products.